# Makefile.in generated by automake 1.9.6 from Makefile.am. # Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # Copyright (C) 2000-2006 MySQL AB # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; version 2 of the License. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # Process this file with automake to create Makefile.in srcdir = . top_srcdir = . pkgdatadir = $(datadir)/mysql pkglibdir = $(libdir)/mysql pkgincludedir = $(includedir)/mysql top_builddir = . am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = /usr/bin/install -c install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = x86_64-unknown-linux-gnu host_triplet = x86_64-unknown-linux-gnu target_triplet = x86_64-unknown-linux-gnu DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/config.h.in \ $(top_srcdir)/bdb/Makefile.in $(top_srcdir)/configure COPYING \ ChangeLog config.guess config.sub depcomp install-sh ltmain.sh \ missing subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/config/ac-macros/alloca.m4 \ $(top_srcdir)/config/ac-macros/check_cpu.m4 \ $(top_srcdir)/config/ac-macros/character_sets.m4 \ $(top_srcdir)/config/ac-macros/compiler_flag.m4 \ $(top_srcdir)/config/ac-macros/ha_archive.m4 \ $(top_srcdir)/config/ac-macros/ha_berkeley.m4 \ $(top_srcdir)/config/ac-macros/ha_blackhole.m4 \ $(top_srcdir)/config/ac-macros/ha_example.m4 \ $(top_srcdir)/config/ac-macros/ha_federated.m4 \ $(top_srcdir)/config/ac-macros/ha_innodb.m4 \ $(top_srcdir)/config/ac-macros/ha_ndbcluster.m4 \ $(top_srcdir)/config/ac-macros/ha_tina.m4 \ $(top_srcdir)/config/ac-macros/large_file.m4 \ $(top_srcdir)/config/ac-macros/misc.m4 \ $(top_srcdir)/config/ac-macros/openssl.m4 \ $(top_srcdir)/config/ac-macros/readline.m4 \ $(top_srcdir)/config/ac-macros/yassl.m4 \ $(top_srcdir)/config/ac-macros/zlib.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = bdb/Makefile SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-exec-recursive install-info-recursive \ install-recursive installcheck-recursive installdirs-recursive \ pdf-recursive ps-recursive uninstall-info-recursive \ uninstall-recursive ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d $(distdir) \ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr $(distdir); }; } DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print ACLOCAL = ${SHELL} /root/work/percona-data-recovery-tool-for-innodb-0.5/mysql-source/missing --run aclocal-1.10 ALLOCA = AMDEP_FALSE = # AMDEP_TRUE = AMTAR = ${SHELL} /root/work/percona-data-recovery-tool-for-innodb-0.5/mysql-source/missing --run tar AR = ar ARFLAGS = cru AS = gcc -c ASSEMBLER_FALSE = ASSEMBLER_TRUE = # ASSEMBLER_sparc32_FALSE = ASSEMBLER_sparc32_TRUE = # ASSEMBLER_sparc64_FALSE = ASSEMBLER_sparc64_TRUE = # ASSEMBLER_x86_FALSE = ASSEMBLER_x86_TRUE = # AUTOCONF = ${SHELL} /root/work/percona-data-recovery-tool-for-innodb-0.5/mysql-source/missing --run autoconf AUTOHEADER = ${SHELL} /root/work/percona-data-recovery-tool-for-innodb-0.5/mysql-source/missing --run autoheader AUTOMAKE = ${SHELL} /root/work/percona-data-recovery-tool-for-innodb-0.5/mysql-source/missing --run automake-1.10 AVAILABLE_LANGUAGES = czech danish dutch english estonian french german greek hungarian italian japanese korean norwegian norwegian-ny polish portuguese romanian russian serbian slovak spanish swedish ukrainian AWK = gawk CC = gcc CCAS = gcc CCASFLAGS = -Wa,--noexecstack CCDEPMODE = depmode=gcc3 CC_VERSION = gcc (GCC) 10.2.1 20200825 (Alibaba 10.2.1-3.8 2.32) CFLAGS = -O3 -DDBUG_OFF CHECK_PID = /usr/bin/kill -0 $$PID > /dev/null 2> /dev/null CHMOD = /usr/bin/chmod CLIENT_EXTRA_LDFLAGS = CLIENT_LIBS = -lcrypt -lm -lz CMP = /usr/bin/cmp COMPILATION_COMMENT = Source distribution COMPILE_PSTACK_FALSE = COMPILE_PSTACK_TRUE = # CONF_COMMAND = ./configure CP = /usr/bin/cp CPP = gcc -E CPPFLAGS = CXX = g++ CXXCPP = g++ -E CXXDEPMODE = depmode=gcc3 CXXFLAGS = -O3 -DDBUG_OFF -fno-implicit-templates -fno-exceptions -fno-rtti CXXLDFLAGS = CXX_VERSION = g++ (GCC) 10.2.1 20200825 (Alibaba 10.2.1-3.8 2.32) CYGPATH_W = echo DARWIN_MWCC_FALSE = DARWIN_MWCC_TRUE = # DEFS = -DHAVE_CONFIG_H DEPDIR = .deps DOT_FRM_VERSION = 6 DOXYGEN = no DVIS = ECHO = echo ECHO_C = ECHO_N = -n ECHO_T = EGREP = /usr/bin/grep -E EXEEXT = F77 = FFLAGS = FIND_PROC = /usr/bin/ps p $$PID | grep -v grep | grep $$MYSQLD > /dev/null GETCONF = getconf GXX = yes HAVE_NDBCLUSTER_DB_FALSE = HAVE_NDBCLUSTER_DB_TRUE = # HAVE_NETWARE_FALSE = HAVE_NETWARE_TRUE = # HAVE_YASSL_FALSE = HAVE_YASSL_TRUE = # HOSTNAME = /usr/bin/hostname ICHECK = no INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s KILL = /usr/bin/kill LD = /usr/bin/ld -m elf_x86_64 LDFLAGS = -rdynamic LD_VERSION_SCRIPT = -Wl,--version-script=$(top_builddir)/libmysql/libmysql.ver LIBDL = -ldl LIBEDIT_LOBJECTS = unvis.o vis.o strlcpy.o strlcat.o fgetln.o LIBOBJS = LIBS = -lpthread -lcrypt -lm -lpthread LIBTOOL = $(SHELL) $(top_builddir)/libtool --preserve-dup-deps LIB_EXTRA_CCFLAGS = LM_CFLAGS = LN = /usr/bin/ln LN_CP_F = /usr/bin/ln -s LN_S = ln -s LTLIBOBJS = MACHINE_TYPE = x86_64 MAKEINDEX = no MAKEINFO = ${SHELL} /root/work/percona-data-recovery-tool-for-innodb-0.5/mysql-source/missing --run makeinfo MAKE_BINARY_DISTRIBUTION_OPTIONS = MAKE_SHELL = /bin/sh MV = /usr/bin/mv MYSQLD_DEFAULT_SWITCHES = --skip-external-locking MYSQLD_EXTRA_LDFLAGS = MYSQLD_EXTRA_LIBS = MYSQLD_USER = mysql MYSQL_BASE_VERSION = 5.0 MYSQL_NO_DASH_VERSION = 5.0.45 MYSQL_PREVIOUS_BASE_VERSION = 4.1 MYSQL_SERVER_SUFFIX = MYSQL_TCP_PORT = 3306 MYSQL_TCP_PORT_DEFAULT = 3306 MYSQL_UNIX_ADDR = /tmp/mysql.sock MYSQL_VERSION_ID = 50045 NDB_DEFS = NDB_LD_VERSION_SCRIPT = NDB_SCI_INCLUDES = NDB_SCI_LIBS = NDB_SHARED_LIB_MAJOR_VERSION = 2 NDB_SHARED_LIB_VERSION = 2:0:0 NDB_SIZEOF_CHAR = NDB_SIZEOF_CHARP = NDB_SIZEOF_INT = NDB_SIZEOF_LONG = NDB_SIZEOF_LONG_LONG = NDB_SIZEOF_SHORT = NDB_VERSION_BUILD = 45 NDB_VERSION_MAJOR = 5 NDB_VERSION_MINOR = 0 NDB_VERSION_STATUS = NM = /usr/bin/nm -B NOINST_LDFLAGS = -static NON_THREADED_LIBS = -lcrypt -lm OBJEXT = o PACKAGE = mysql PACKAGE_BUGREPORT = PACKAGE_NAME = PACKAGE_STRING = PACKAGE_TARNAME = PACKAGE_VERSION = PATH_SEPARATOR = : PDFLATEX = no PDFMANUAL = PERL = /usr/bin/perl PERL5 = /usr/bin/perl PROTOCOL_VERSION = 10 PS = /usr/bin/ps RANLIB = ranlib RM = /usr/bin/rm SAVE_ASFLAGS = SAVE_CFLAGS = SAVE_CXXFLAGS = SAVE_CXXLDFLAGS = SAVE_LDFLAGS = SED = /usr/bin/sed SET_MAKE = SHARED_LIB_MAJOR_VERSION = 15 SHARED_LIB_VERSION = 15:0:0 SHELL = /bin/sh STATIC_NSS_FLAGS = STRIP = strip SYSTEM_TYPE = unknown-linux-gnu TAR = gtar TARGET_LINUX = true TERMCAP_LIB = -lncurses THREAD_LOBJECTS = thr_alarm.o thr_lock.o thr_mutex.o thr_rwlock.o my_pthread.o my_thr_init.o mf_keycache.o VERSION = 5.0.45 WRAPLIBS = YACC = bison -y -p MYSQL ZLIB_DEPS = -lz ZLIB_INCLUDES = ZLIB_LIBS = -lz ac_ct_AR = @ac_ct_AR@ ac_ct_CC = gcc ac_ct_CXX = g++ ac_ct_F77 = ac_ct_GETCONF = @ac_ct_GETCONF@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = # am__fastdepCC_TRUE = am__fastdepCXX_FALSE = # am__fastdepCXX_TRUE = am__include = include am__leading_dot = . am__quote = am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - bdb_includes = bdb_libs = bdb_libs_with_path = bench_dirs = sql-bench mysql-test bindir = ${exec_prefix}/bin build = x86_64-unknown-linux-gnu build_alias = build_cpu = x86_64 build_os = linux-gnu build_vendor = unknown datadir = ${prefix}/share docs_dirs = Docs exec_prefix = ${prefix} host = x86_64-unknown-linux-gnu host_alias = host_cpu = x86_64 host_os = linux-gnu host_vendor = unknown includedir = ${prefix}/include infodir = ${prefix}/share/info innodb_includes = -I$(top_builddir)/innobase/include -I$(top_srcdir)/innobase/include innodb_libs = $(top_builddir)/innobase/usr/libusr.a $(top_builddir)/innobase/srv/libsrv.a $(top_builddir)/innobase/dict/libdict.a $(top_builddir)/innobase/que/libque.a $(top_builddir)/innobase/srv/libsrv.a $(top_builddir)/innobase/ibuf/libibuf.a $(top_builddir)/innobase/row/librow.a $(top_builddir)/innobase/pars/libpars.a $(top_builddir)/innobase/btr/libbtr.a $(top_builddir)/innobase/trx/libtrx.a $(top_builddir)/innobase/read/libread.a $(top_builddir)/innobase/usr/libusr.a $(top_builddir)/innobase/buf/libbuf.a $(top_builddir)/innobase/ibuf/libibuf.a $(top_builddir)/innobase/eval/libeval.a $(top_builddir)/innobase/log/liblog.a $(top_builddir)/innobase/fsp/libfsp.a $(top_builddir)/innobase/fut/libfut.a $(top_builddir)/innobase/fil/libfil.a $(top_builddir)/innobase/lock/liblock.a $(top_builddir)/innobase/mtr/libmtr.a $(top_builddir)/innobase/page/libpage.a $(top_builddir)/innobase/rem/librem.a $(top_builddir)/innobase/thr/libthr.a $(top_builddir)/innobase/sync/libsync.a $(top_builddir)/innobase/data/libdata.a $(top_builddir)/innobase/mach/libmach.a $(top_builddir)/innobase/ha/libha.a $(top_builddir)/innobase/dyn/libdyn.a $(top_builddir)/innobase/mem/libmem.a $(top_builddir)/innobase/sync/libsync.a $(top_builddir)/innobase/ut/libut.a $(top_builddir)/innobase/os/libos.a $(top_builddir)/innobase/ut/libut.a innodb_system_libs = -lrt install_sh = $(SHELL) /root/work/percona-data-recovery-tool-for-innodb-0.5/mysql-source/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec libmysqld_dirs = linked_client_targets = linked_libmysql_sources linked_libmysqld_targets = linked_netware_sources = localstatedir = ${prefix}/var man1_files = man8_files = man_dirs = man mandir = ${prefix}/share/man mkdir_p = /usr/bin/mkdir -p ndb_bin_am_ldflags = ndb_cxxflags_fix = ndb_mgmclient_libs = ndb_opt_subdirs = ndb_port = ndb_transporter_opt_objs = ndbcluster_includes = ndbcluster_libs = ndbcluster_system_libs = netware_dir = oldincludedir = /usr/include openssl_includes = openssl_libs = prefix = /usr/local program_transform_name = s,x,x, pstack_dirs = pstack_libs = readline_basedir = libedit readline_dir = cmd-line-utils/libedit readline_h_ln_cmd = $(LN) -s $(top_srcdir)/cmd-line-utils/libedit/readline readline readline_link = $(top_builddir)/cmd-line-utils/libedit/libedit.a readline_topdir = cmd-line-utils sbindir = ${exec_prefix}/sbin server_scripts = mysqld_safe mysql_install_db sharedstatedir = ${prefix}/com sql_client_dirs = strings regex mysys libmysql client sql_server_dirs = strings mysys dbug extra regex innobase myisam myisammrg heap vio sql sql_union_dirs = strings mysys dbug extra regex innobase myisam myisammrg heap vio sql libmysql client subdirs = innobase sysconfdir = ${prefix}/etc target = x86_64-unknown-linux-gnu target_alias = target_cpu = x86_64 target_os = linux-gnu target_vendor = unknown thread_dirs = tools_dirs = server-tools uname_prog = /usr/bin/uname yassl_dir = yassl_h_ln_cmd = yassl_libs = yassl_taocrypt_extra_cxxflags = zlib_dir = AUTOMAKE_OPTIONS = foreign # These are built from source in the Docs directory EXTRA_DIST = INSTALL-SOURCE INSTALL-WIN-SOURCE \ README COPYING EXCEPTIONS-CLIENT CMakeLists.txt SUBDIRS = . include Docs \ cmd-line-utils sql-common scripts \ pstack \ strings mysys dbug extra regex innobase myisam myisammrg heap vio sql libmysql client man tests \ netware \ sql-bench mysql-test support-files server-tools DIST_SUBDIRS = . include Docs zlib \ cmd-line-utils sql-common \ pstack \ strings mysys dbug extra regex innobase myisam myisammrg heap vio sql libmysql client scripts man tests SSL\ BUILD netware os2 \ sql-bench mysql-test support-files server-tools win \ debian # Run these targets before any others, also make part of clean target, # to make sure we create new links after a clean. BUILT_SOURCES = linked_client_sources linked_server_sources \ linked_libmysql_sources \ \ linked_include_sources # The db.h file is a bit special, see note in "configure.in". # In the case we didn't compile with bdb, a dummy file is put # there, but will not be removed by the bdb make file becuase # it will never be called. CLEANFILES = $(BUILT_SOURCES) bdb/build_unix/db.h DISTCLEANFILES = ac_available_languages_fragment # Our current filtering of "sql_yacc.cc" in "sql/Makefile.am" creates # a problem, if a VPATH build and "sql_yacc.cc" was part of the source # distribution we end up with one "sql_yacc.cc" in the source tree, # and one in the build tree. This breaks "distcleancheck", until this # is sorted out we redefine the find that scans for files not removed distcleancheck_listfiles = find . -name sql_yacc.cc -o -type f -print all: $(BUILT_SOURCES) config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ cd $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) cd $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: $(am__configure_deps) cd $(top_srcdir) && $(AUTOHEADER) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 bdb/Makefile: $(top_builddir)/config.status $(top_srcdir)/bdb/Makefile.in cd $(top_builddir) && $(SHELL) ./config.status $@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) mkdir $(distdir) $(mkdir_p) $(distdir)/bdb $(distdir)/config/ac-macros $(distdir)/debian $(distdir)/include $(distdir)/libmysql $(distdir)/ndb/include $(distdir)/ndb/src @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(mkdir_p) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && cd $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' distuninstallcheck: @cd $(distuninstallcheck_dir) \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-recursive all-am: Makefile config.h installdirs: installdirs-recursive installdirs-am: install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr \ distclean-libtool distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-exec-am: install-info: install-info-recursive install-man: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-info-am uninstall-info: uninstall-info-recursive .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ check-am clean clean-generic clean-libtool clean-recursive \ ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ dist-hook dist-shar dist-tarZ dist-zip distcheck distclean \ distclean-generic distclean-hdr distclean-libtool \ distclean-recursive distclean-tags distcleancheck distdir \ distuninstallcheck dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-exec \ install-exec-am install-info install-info-am install-man \ install-strip installcheck installcheck-am installdirs \ installdirs-am maintainer-clean maintainer-clean-generic \ maintainer-clean-recursive mostlyclean mostlyclean-generic \ mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am uninstall-info-am linked_include_sources: cd include; $(MAKE) link_sources echo timestamp > linked_include_sources linked_client_sources: linked_libmysql_sources cd client; $(MAKE) link_sources echo timestamp > linked_client_sources linked_libmysql_sources: cd libmysql; $(MAKE) link_sources echo timestamp > linked_libmysql_sources linked_libmysql_r_sources: linked_libmysql_sources cd libmysql_r; $(MAKE) link_sources echo timestamp > linked_libmysql_r_sources linked_libmysqld_sources: cd libmysqld; $(MAKE) link_sources echo timestamp > linked_libmysqld_sources linked_libmysqldex_sources: cd libmysqld/examples; $(MAKE) link_sources echo timestamp > linked_libmysqldex_sources linked_netware_sources: cd ; $(MAKE) link_sources echo timestamp > linked_netware_sources linked_server_sources: cd sql; $(MAKE) link_sources echo timestamp > linked_server_sources # Create permission databases init-db: all $(top_builddir)/scripts/mysql_install_db bin-dist: all $(top_builddir)/scripts/make_binary_distribution # Remove BK's "SCCS" subdirectories from source distribution # Create initial database files for Windows installations. dist-hook: rm -rf `find $(distdir) -type d -name SCCS -print` rm -f `find $(distdir) -type l -print` mkdir -p $(distdir)/win scripts/mysql_install_db --no-defaults --windows \ --basedir=$(top_builddir) \ --datadir=$(distdir)/win/data \ --srcdir=$(top_srcdir) tags: support-files/build-tags .PHONY: init-db bin-dist \ test test-force test-full test-force-full test-force-mem \ test-pl test-force-pl test-full-pl test-force-full-pl test-force-pl-mem \ test-ps test-ns test-ext-funcs test-ext \ test-fast test-fast-cursor test-fast-view test-fast-prepare \ test-full-qa # Target 'test' will run the regression test suite using the built server. # # If you are running in a shared environment, users can avoid clashing # port numbers by setting individual small numbers 1-100 to the # environment variable MTR_BUILD_THREAD. The script "mysql-test-run" # will then calculate the various port numbers it needs from this, # making sure each user use different ports. test-ps: cd mysql-test ; \ /usr/bin/perl ./mysql-test-run.pl $(force) $(mem) --ps-protocol test-ns: cd mysql-test ; \ /usr/bin/perl ./mysql-test-run.pl $(force) $(mem) test: test-ns test-ps # To ease script-writing, although in 5.0 it is identical to 'test' test-full: test test-force: $(MAKE) force=--force test test-force-full: $(MAKE) force=--force test-full #used by autopush.pl to run memory based tests test-force-mem: $(MAKE) force=--force mem=--mem test test-bt: -cd mysql-test ; MTR_BUILD_THREAD=auto \ /usr/bin/perl ./mysql-test-run.pl --force --comment=normal --report-features -cd mysql-test ; MTR_BUILD_THREAD=auto \ /usr/bin/perl ./mysql-test-run.pl --force --comment=ps --ps-protocol -cd mysql-test ; MTR_BUILD_THREAD=auto \ /usr/bin/perl ./mysql-test-run.pl --force --comment=funcs1_ps --ps-protocol --suite=funcs_1 -cd mysql-test ; MTR_BUILD_THREAD=auto \ /usr/bin/perl ./mysql-test-run.pl --force --comment=funcs2 --suite=funcs_2 -cd mysql-test ; MTR_BUILD_THREAD=auto \ /usr/bin/perl ./mysql-test-run.pl --force --comment=rowlock --suite=row_lock test-bt-debug: -cd mysql-test ; MTR_BUILD_THREAD=auto \ /usr/bin/perl ./mysql-test-run.pl --force --comment=debug --report-features # Keep these for a while test-pl: test test-full-pl: test-full test-force-pl: test-force test-force-pl-mem: test-force-mem test-force-full-pl: test-force-full test-ext-funcs: cd mysql-test ; \ /usr/bin/perl ./mysql-test-run.pl --force --suite=funcs_1 ; \ /usr/bin/perl ./mysql-test-run.pl --force --suite=funcs_2 test-ext: test-ext-funcs test-fast: cd mysql-test ; \ /usr/bin/perl ./mysql-test-run.pl $(subset) --force --skip-ndb --skip-innodb --skip-im --skip-rpl ; \ /usr/bin/perl ./mysql-test-run.pl $(subset) --force --suite=funcs_1 --do-test=myisam test-fast-view: $(MAKE) subset=--view-protocol test-fast test-fast-cursor: $(MAKE) subset=--cursor-protocol test-fast test-fast-prepare: $(MAKE) subset=--ps-protocol test-fast test-full-qa: $(MAKE) force=--force test-pl \ test-ext test-fast-view \ test-fast-cursor # Don't update the files from bitkeeper %::SCCS/s.% # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: