# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # Copyright (C) 2000-2006 MySQL AB # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; version 2 of the License. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # Process this file with automake to create Makefile.in srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = . am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ target_triplet = @target@ DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/config.h.in \ $(top_srcdir)/bdb/Makefile.in $(top_srcdir)/configure COPYING \ ChangeLog config.guess config.sub depcomp install-sh ltmain.sh \ missing subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/config/ac-macros/alloca.m4 \ $(top_srcdir)/config/ac-macros/check_cpu.m4 \ $(top_srcdir)/config/ac-macros/character_sets.m4 \ $(top_srcdir)/config/ac-macros/compiler_flag.m4 \ $(top_srcdir)/config/ac-macros/ha_archive.m4 \ $(top_srcdir)/config/ac-macros/ha_berkeley.m4 \ $(top_srcdir)/config/ac-macros/ha_blackhole.m4 \ $(top_srcdir)/config/ac-macros/ha_example.m4 \ $(top_srcdir)/config/ac-macros/ha_federated.m4 \ $(top_srcdir)/config/ac-macros/ha_innodb.m4 \ $(top_srcdir)/config/ac-macros/ha_ndbcluster.m4 \ $(top_srcdir)/config/ac-macros/ha_tina.m4 \ $(top_srcdir)/config/ac-macros/large_file.m4 \ $(top_srcdir)/config/ac-macros/misc.m4 \ $(top_srcdir)/config/ac-macros/openssl.m4 \ $(top_srcdir)/config/ac-macros/readline.m4 \ $(top_srcdir)/config/ac-macros/yassl.m4 \ $(top_srcdir)/config/ac-macros/zlib.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = bdb/Makefile SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-exec-recursive install-info-recursive \ install-recursive installcheck-recursive installdirs-recursive \ pdf-recursive ps-recursive uninstall-info-recursive \ uninstall-recursive ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d $(distdir) \ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr $(distdir); }; } DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ ALLOCA = @ALLOCA@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ ARFLAGS = @ARFLAGS@ AS = @AS@ ASSEMBLER_FALSE = @ASSEMBLER_FALSE@ ASSEMBLER_TRUE = @ASSEMBLER_TRUE@ ASSEMBLER_sparc32_FALSE = @ASSEMBLER_sparc32_FALSE@ ASSEMBLER_sparc32_TRUE = @ASSEMBLER_sparc32_TRUE@ ASSEMBLER_sparc64_FALSE = @ASSEMBLER_sparc64_FALSE@ ASSEMBLER_sparc64_TRUE = @ASSEMBLER_sparc64_TRUE@ ASSEMBLER_x86_FALSE = @ASSEMBLER_x86_FALSE@ ASSEMBLER_x86_TRUE = @ASSEMBLER_x86_TRUE@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AVAILABLE_LANGUAGES = @AVAILABLE_LANGUAGES@ AWK = @AWK@ CC = @CC@ CCAS = @CCAS@ CCASFLAGS = @CCASFLAGS@ CCDEPMODE = @CCDEPMODE@ CC_VERSION = @CC_VERSION@ CFLAGS = @CFLAGS@ CHECK_PID = @CHECK_PID@ CHMOD = @CHMOD@ CLIENT_EXTRA_LDFLAGS = @CLIENT_EXTRA_LDFLAGS@ CLIENT_LIBS = @CLIENT_LIBS@ CMP = @CMP@ COMPILATION_COMMENT = @COMPILATION_COMMENT@ COMPILE_PSTACK_FALSE = @COMPILE_PSTACK_FALSE@ COMPILE_PSTACK_TRUE = @COMPILE_PSTACK_TRUE@ CONF_COMMAND = @CONF_COMMAND@ CP = @CP@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CXXLDFLAGS = @CXXLDFLAGS@ CXX_VERSION = @CXX_VERSION@ CYGPATH_W = @CYGPATH_W@ DARWIN_MWCC_FALSE = @DARWIN_MWCC_FALSE@ DARWIN_MWCC_TRUE = @DARWIN_MWCC_TRUE@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DOT_FRM_VERSION = @DOT_FRM_VERSION@ DOXYGEN = @DOXYGEN@ DVIS = @DVIS@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ F77 = @F77@ FFLAGS = @FFLAGS@ FIND_PROC = @FIND_PROC@ GETCONF = @GETCONF@ GXX = @GXX@ HAVE_NDBCLUSTER_DB_FALSE = @HAVE_NDBCLUSTER_DB_FALSE@ HAVE_NDBCLUSTER_DB_TRUE = @HAVE_NDBCLUSTER_DB_TRUE@ HAVE_NETWARE_FALSE = @HAVE_NETWARE_FALSE@ HAVE_NETWARE_TRUE = @HAVE_NETWARE_TRUE@ HAVE_YASSL_FALSE = @HAVE_YASSL_FALSE@ HAVE_YASSL_TRUE = @HAVE_YASSL_TRUE@ HOSTNAME = @HOSTNAME@ ICHECK = @ICHECK@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ KILL = @KILL@ LD = @LD@ LDFLAGS = @LDFLAGS@ LD_VERSION_SCRIPT = @LD_VERSION_SCRIPT@ LIBDL = @LIBDL@ LIBEDIT_LOBJECTS = @LIBEDIT_LOBJECTS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIB_EXTRA_CCFLAGS = @LIB_EXTRA_CCFLAGS@ LM_CFLAGS = @LM_CFLAGS@ LN = @LN@ LN_CP_F = @LN_CP_F@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MACHINE_TYPE = @MACHINE_TYPE@ MAKEINDEX = @MAKEINDEX@ MAKEINFO = @MAKEINFO@ MAKE_BINARY_DISTRIBUTION_OPTIONS = @MAKE_BINARY_DISTRIBUTION_OPTIONS@ MAKE_SHELL = @MAKE_SHELL@ MV = @MV@ MYSQLD_DEFAULT_SWITCHES = @MYSQLD_DEFAULT_SWITCHES@ MYSQLD_EXTRA_LDFLAGS = @MYSQLD_EXTRA_LDFLAGS@ MYSQLD_EXTRA_LIBS = @MYSQLD_EXTRA_LIBS@ MYSQLD_USER = @MYSQLD_USER@ MYSQL_BASE_VERSION = @MYSQL_BASE_VERSION@ MYSQL_NO_DASH_VERSION = @MYSQL_NO_DASH_VERSION@ MYSQL_PREVIOUS_BASE_VERSION = @MYSQL_PREVIOUS_BASE_VERSION@ MYSQL_SERVER_SUFFIX = @MYSQL_SERVER_SUFFIX@ MYSQL_TCP_PORT = @MYSQL_TCP_PORT@ MYSQL_TCP_PORT_DEFAULT = @MYSQL_TCP_PORT_DEFAULT@ MYSQL_UNIX_ADDR = @MYSQL_UNIX_ADDR@ MYSQL_VERSION_ID = @MYSQL_VERSION_ID@ NDB_DEFS = @NDB_DEFS@ NDB_LD_VERSION_SCRIPT = @NDB_LD_VERSION_SCRIPT@ NDB_SCI_INCLUDES = @NDB_SCI_INCLUDES@ NDB_SCI_LIBS = @NDB_SCI_LIBS@ NDB_SHARED_LIB_MAJOR_VERSION = @NDB_SHARED_LIB_MAJOR_VERSION@ NDB_SHARED_LIB_VERSION = @NDB_SHARED_LIB_VERSION@ NDB_SIZEOF_CHAR = @NDB_SIZEOF_CHAR@ NDB_SIZEOF_CHARP = @NDB_SIZEOF_CHARP@ NDB_SIZEOF_INT = @NDB_SIZEOF_INT@ NDB_SIZEOF_LONG = @NDB_SIZEOF_LONG@ NDB_SIZEOF_LONG_LONG = @NDB_SIZEOF_LONG_LONG@ NDB_SIZEOF_SHORT = @NDB_SIZEOF_SHORT@ NDB_VERSION_BUILD = @NDB_VERSION_BUILD@ NDB_VERSION_MAJOR = @NDB_VERSION_MAJOR@ NDB_VERSION_MINOR = @NDB_VERSION_MINOR@ NDB_VERSION_STATUS = @NDB_VERSION_STATUS@ NM = @NM@ NOINST_LDFLAGS = @NOINST_LDFLAGS@ NON_THREADED_LIBS = @NON_THREADED_LIBS@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PDFLATEX = @PDFLATEX@ PDFMANUAL = @PDFMANUAL@ PERL = @PERL@ PERL5 = @PERL5@ PROTOCOL_VERSION = @PROTOCOL_VERSION@ PS = @PS@ RANLIB = @RANLIB@ RM = @RM@ SAVE_ASFLAGS = @SAVE_ASFLAGS@ SAVE_CFLAGS = @SAVE_CFLAGS@ SAVE_CXXFLAGS = @SAVE_CXXFLAGS@ SAVE_CXXLDFLAGS = @SAVE_CXXLDFLAGS@ SAVE_LDFLAGS = @SAVE_LDFLAGS@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHARED_LIB_MAJOR_VERSION = @SHARED_LIB_MAJOR_VERSION@ SHARED_LIB_VERSION = @SHARED_LIB_VERSION@ SHELL = @SHELL@ STATIC_NSS_FLAGS = @STATIC_NSS_FLAGS@ STRIP = @STRIP@ SYSTEM_TYPE = @SYSTEM_TYPE@ TAR = @TAR@ TARGET_LINUX = @TARGET_LINUX@ TERMCAP_LIB = @TERMCAP_LIB@ THREAD_LOBJECTS = @THREAD_LOBJECTS@ VERSION = @VERSION@ WRAPLIBS = @WRAPLIBS@ YACC = @YACC@ ZLIB_DEPS = @ZLIB_DEPS@ ZLIB_INCLUDES = @ZLIB_INCLUDES@ ZLIB_LIBS = @ZLIB_LIBS@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ ac_ct_GETCONF = @ac_ct_GETCONF@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bdb_includes = @bdb_includes@ bdb_libs = @bdb_libs@ bdb_libs_with_path = @bdb_libs_with_path@ bench_dirs = @bench_dirs@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ docs_dirs = @docs_dirs@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ includedir = @includedir@ infodir = @infodir@ innodb_includes = @innodb_includes@ innodb_libs = @innodb_libs@ innodb_system_libs = @innodb_system_libs@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ libmysqld_dirs = @libmysqld_dirs@ linked_client_targets = @linked_client_targets@ linked_libmysqld_targets = @linked_libmysqld_targets@ linked_netware_sources = @linked_netware_sources@ localstatedir = @localstatedir@ man1_files = @man1_files@ man8_files = @man8_files@ man_dirs = @man_dirs@ mandir = @mandir@ mkdir_p = @mkdir_p@ ndb_bin_am_ldflags = @ndb_bin_am_ldflags@ ndb_cxxflags_fix = @ndb_cxxflags_fix@ ndb_mgmclient_libs = @ndb_mgmclient_libs@ ndb_opt_subdirs = @ndb_opt_subdirs@ ndb_port = @ndb_port@ ndb_transporter_opt_objs = @ndb_transporter_opt_objs@ ndbcluster_includes = @ndbcluster_includes@ ndbcluster_libs = @ndbcluster_libs@ ndbcluster_system_libs = @ndbcluster_system_libs@ netware_dir = @netware_dir@ oldincludedir = @oldincludedir@ openssl_includes = @openssl_includes@ openssl_libs = @openssl_libs@ prefix = @prefix@ program_transform_name = @program_transform_name@ pstack_dirs = @pstack_dirs@ pstack_libs = @pstack_libs@ readline_basedir = @readline_basedir@ readline_dir = @readline_dir@ readline_h_ln_cmd = @readline_h_ln_cmd@ readline_link = @readline_link@ readline_topdir = @readline_topdir@ sbindir = @sbindir@ server_scripts = @server_scripts@ sharedstatedir = @sharedstatedir@ sql_client_dirs = @sql_client_dirs@ sql_server_dirs = @sql_server_dirs@ sql_union_dirs = @sql_union_dirs@ subdirs = @subdirs@ sysconfdir = @sysconfdir@ target = @target@ target_alias = @target_alias@ target_cpu = @target_cpu@ target_os = @target_os@ target_vendor = @target_vendor@ thread_dirs = @thread_dirs@ tools_dirs = @tools_dirs@ uname_prog = @uname_prog@ yassl_dir = @yassl_dir@ yassl_h_ln_cmd = @yassl_h_ln_cmd@ yassl_libs = @yassl_libs@ yassl_taocrypt_extra_cxxflags = @yassl_taocrypt_extra_cxxflags@ zlib_dir = @zlib_dir@ AUTOMAKE_OPTIONS = foreign # These are built from source in the Docs directory EXTRA_DIST = INSTALL-SOURCE INSTALL-WIN-SOURCE \ README COPYING EXCEPTIONS-CLIENT CMakeLists.txt SUBDIRS = . include @docs_dirs@ @zlib_dir@ @yassl_dir@ \ @readline_topdir@ sql-common scripts \ @thread_dirs@ pstack \ @sql_union_dirs@ @man_dirs@ tests \ netware @libmysqld_dirs@ \ @bench_dirs@ support-files @tools_dirs@ DIST_SUBDIRS = . include @docs_dirs@ zlib \ @readline_topdir@ sql-common \ @thread_dirs@ pstack \ @sql_union_dirs@ scripts @man_dirs@ tests SSL\ BUILD netware os2 @libmysqld_dirs@ \ @bench_dirs@ support-files @tools_dirs@ win \ debian # Run these targets before any others, also make part of clean target, # to make sure we create new links after a clean. BUILT_SOURCES = linked_client_sources linked_server_sources \ @linked_client_targets@ \ @linked_libmysqld_targets@ \ linked_include_sources @linked_netware_sources@ # The db.h file is a bit special, see note in "configure.in". # In the case we didn't compile with bdb, a dummy file is put # there, but will not be removed by the bdb make file becuase # it will never be called. CLEANFILES = $(BUILT_SOURCES) bdb/build_unix/db.h DISTCLEANFILES = ac_available_languages_fragment # Our current filtering of "sql_yacc.cc" in "sql/Makefile.am" creates # a problem, if a VPATH build and "sql_yacc.cc" was part of the source # distribution we end up with one "sql_yacc.cc" in the source tree, # and one in the build tree. This breaks "distcleancheck", until this # is sorted out we redefine the find that scans for files not removed distcleancheck_listfiles = find . -name sql_yacc.cc -o -type f -print all: $(BUILT_SOURCES) config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ cd $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) cd $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: $(am__configure_deps) cd $(top_srcdir) && $(AUTOHEADER) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 bdb/Makefile: $(top_builddir)/config.status $(top_srcdir)/bdb/Makefile.in cd $(top_builddir) && $(SHELL) ./config.status $@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) mkdir $(distdir) $(mkdir_p) $(distdir)/bdb $(distdir)/config/ac-macros $(distdir)/debian $(distdir)/include $(distdir)/libmysql $(distdir)/ndb/include $(distdir)/ndb/src @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(mkdir_p) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && cd $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' distuninstallcheck: @cd $(distuninstallcheck_dir) \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-recursive all-am: Makefile config.h installdirs: installdirs-recursive installdirs-am: install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr \ distclean-libtool distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-exec-am: install-info: install-info-recursive install-man: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-info-am uninstall-info: uninstall-info-recursive .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ check-am clean clean-generic clean-libtool clean-recursive \ ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ dist-hook dist-shar dist-tarZ dist-zip distcheck distclean \ distclean-generic distclean-hdr distclean-libtool \ distclean-recursive distclean-tags distcleancheck distdir \ distuninstallcheck dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-exec \ install-exec-am install-info install-info-am install-man \ install-strip installcheck installcheck-am installdirs \ installdirs-am maintainer-clean maintainer-clean-generic \ maintainer-clean-recursive mostlyclean mostlyclean-generic \ mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am uninstall-info-am linked_include_sources: cd include; $(MAKE) link_sources echo timestamp > linked_include_sources linked_client_sources: @linked_client_targets@ cd client; $(MAKE) link_sources echo timestamp > linked_client_sources linked_libmysql_sources: cd libmysql; $(MAKE) link_sources echo timestamp > linked_libmysql_sources linked_libmysql_r_sources: linked_libmysql_sources cd libmysql_r; $(MAKE) link_sources echo timestamp > linked_libmysql_r_sources linked_libmysqld_sources: cd libmysqld; $(MAKE) link_sources echo timestamp > linked_libmysqld_sources linked_libmysqldex_sources: cd libmysqld/examples; $(MAKE) link_sources echo timestamp > linked_libmysqldex_sources linked_netware_sources: cd @netware_dir@; $(MAKE) link_sources echo timestamp > linked_netware_sources linked_server_sources: cd sql; $(MAKE) link_sources echo timestamp > linked_server_sources # Create permission databases init-db: all $(top_builddir)/scripts/mysql_install_db bin-dist: all $(top_builddir)/scripts/make_binary_distribution @MAKE_BINARY_DISTRIBUTION_OPTIONS@ # Remove BK's "SCCS" subdirectories from source distribution # Create initial database files for Windows installations. dist-hook: rm -rf `find $(distdir) -type d -name SCCS -print` rm -f `find $(distdir) -type l -print` mkdir -p $(distdir)/win scripts/mysql_install_db --no-defaults --windows \ --basedir=$(top_builddir) \ --datadir=$(distdir)/win/data \ --srcdir=$(top_srcdir) tags: support-files/build-tags .PHONY: init-db bin-dist \ test test-force test-full test-force-full test-force-mem \ test-pl test-force-pl test-full-pl test-force-full-pl test-force-pl-mem \ test-ps test-ns test-ext-funcs test-ext \ test-fast test-fast-cursor test-fast-view test-fast-prepare \ test-full-qa # Target 'test' will run the regression test suite using the built server. # # If you are running in a shared environment, users can avoid clashing # port numbers by setting individual small numbers 1-100 to the # environment variable MTR_BUILD_THREAD. The script "mysql-test-run" # will then calculate the various port numbers it needs from this, # making sure each user use different ports. test-ps: cd mysql-test ; \ @PERL@ ./mysql-test-run.pl $(force) $(mem) --ps-protocol test-ns: cd mysql-test ; \ @PERL@ ./mysql-test-run.pl $(force) $(mem) test: test-ns test-ps # To ease script-writing, although in 5.0 it is identical to 'test' test-full: test test-force: $(MAKE) force=--force test test-force-full: $(MAKE) force=--force test-full #used by autopush.pl to run memory based tests test-force-mem: $(MAKE) force=--force mem=--mem test test-bt: -cd mysql-test ; MTR_BUILD_THREAD=auto \ @PERL@ ./mysql-test-run.pl --force --comment=normal --report-features -cd mysql-test ; MTR_BUILD_THREAD=auto \ @PERL@ ./mysql-test-run.pl --force --comment=ps --ps-protocol -cd mysql-test ; MTR_BUILD_THREAD=auto \ @PERL@ ./mysql-test-run.pl --force --comment=funcs1_ps --ps-protocol --suite=funcs_1 -cd mysql-test ; MTR_BUILD_THREAD=auto \ @PERL@ ./mysql-test-run.pl --force --comment=funcs2 --suite=funcs_2 -cd mysql-test ; MTR_BUILD_THREAD=auto \ @PERL@ ./mysql-test-run.pl --force --comment=rowlock --suite=row_lock test-bt-debug: -cd mysql-test ; MTR_BUILD_THREAD=auto \ @PERL@ ./mysql-test-run.pl --force --comment=debug --report-features # Keep these for a while test-pl: test test-full-pl: test-full test-force-pl: test-force test-force-pl-mem: test-force-mem test-force-full-pl: test-force-full test-ext-funcs: cd mysql-test ; \ @PERL@ ./mysql-test-run.pl --force --suite=funcs_1 ; \ @PERL@ ./mysql-test-run.pl --force --suite=funcs_2 test-ext: test-ext-funcs test-fast: cd mysql-test ; \ @PERL@ ./mysql-test-run.pl $(subset) --force --skip-ndb --skip-innodb --skip-im --skip-rpl ; \ @PERL@ ./mysql-test-run.pl $(subset) --force --suite=funcs_1 --do-test=myisam test-fast-view: $(MAKE) subset=--view-protocol test-fast test-fast-cursor: $(MAKE) subset=--cursor-protocol test-fast test-fast-prepare: $(MAKE) subset=--ps-protocol test-fast test-full-qa: $(MAKE) force=--force test-pl \ test-ext test-fast-view \ test-fast-cursor # Don't update the files from bitkeeper %::SCCS/s.% # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: